EN - How to close the vents before opening the screens to avoid cold fall

EN - How to close the vents before opening the screens to avoid cold fall

   

Question

How to close the vents before opening the screens to avoid cold fall?

 Answer 

Example 1

The screen is closed during the night as energy screen.



The ventilation temperature can be increased as soon as the curtain is opening. This is done via the influence "curtain: opening (0=no, 1=yes)"
Remark: the influence "curtain: opening (0=no, 1=yes)" is new in software version 10.

Example 2

The screen is closed during the night as energy screen.
The RH setpoint is for example 80%.
The priority for RH control is for example:
- from 80% to 85% open the vents for 5%
- from 85% to 90% open the screen for 3%



The vents are closed as soon as the curtain is opening. This is done via the influence "curtain: opening (0=no, 1=yes)"
Remark: the influence "curtain: opening (0=no, 1=yes)" is new in software version 10.







The energy screen opens in 2 steps. The first step is 0%. This is done via the influence "curtain: energy active"
Wait 5 minutes (interval time) after the first step. During this time the vents can close.



After the first step the screen is opened 90%. to dry the screen.
The last step opens the screen totally.

    • Related Articles

    • EN - How to avoid mixing up worksheets with Teamviewer ?

           How to avoid mixing up worksheets with Teamviewer? If the control is taken over remotely by TeamViewer, then all the definitions move to the left screen. This can be prevented by the following adaptation: Close TeamViewer completely (the tray ...

    • EN - How to work with +Active Air overpressure

      Question How do I work with +Active Air overpressure?  Answer  The Active Air overpressure is used in the following situations: In these situations the maximum overpressure is 15 Pa (in practice between 10 and 15). During recirculation a minimum ...

    • EN - How to connect a Netafim unit

      This article is only for Hoogendoorn Partners Question How to connect a Netafim unit?  Answer  Please read te attached product sheet, installation manual and user manual. You need a Datapoint with a normal C150 bus-coupler (so you don't need a C150e ...

    • EN - How can I read the iSii help screens ?

                       How can I read the iSii help screens? The help in the iSii system is context sensitive. This works as follows: select an item and press the F1 key and the help will appear. Sometimes it is useful to view the help screens as a pdf ...

    • EN - When is Connected screening useful to me?

      EN - When is Connected screening useful to me? Question When is connected screening useful to me, can I improve my skills?                                                                            Answer If you want to know more of the effects of ...