EN - How to work with +Active Air cooling

EN - How to work with +Active Air cooling

Question

How do I work with +Active Air cooling?

 Answer 



The pad wall can be controlled in 5 stages by the cooling program.


In the example above the cooling is starting when the greenhouse temperature is higher than 22 °C.
With the influence "difference Active Air ventilation temperature - outside temperature" the cooling is started earlier when it becomes warmer outside.
With the influence "radiation: measurement" the cooling is started earlier when it becomes sunny outside.

    • Related Articles

    • EN - How to work with +Active Air valve

      Question How do I work with +Active Air valve?  Answer  The Active Air valve is used in the following situations: In the example above the valve is opened from 0 to 100% when the greenhouse temperature is from 20 to 22 (=20 + 2) °C. With the ...

    • EN - How to work with +Active Air in a (semi) closed greenhouse

           Question How to work with +Active Air in a (semi) closed greenhouse?  Answer  The climate settings: The standard settings ventilation temperature leeside and windside are set to 35 °C and are hidden. Cooling 1 can be a pad wall and cooling 2 can ...

    • EN - How to work with +Active Air fan

      Question How do I work with +Active Air fan ?  Answer  The fan must run at a minimum speed of 40%. The Active Air fan is used in the following situations: In the example above the fan speed is from 40 to 100% when the greenhouse temperature is from ...

    • EN - How to work with +Active Air overpressure

      Question How do I work with +Active Air overpressure?  Answer  The Active Air overpressure is used in the following situations: In these situations the maximum overpressure is 15 Pa (in practice between 10 and 15). During recirculation a minimum ...

    • EN - How to work with +Active Air heating

      Question How do I work with +Active Air heating?  Answer  The Active Air heating is used in the following situations: The computed temperature of the heating element is between the minimum and maximum temperature. The pump is switched on when the ...