EN - How the tank control works for CO2

EN - How the tank control works for CO2

    
Question

How the tank control works for CO2?



 Answer 

The most important settings of the tank control for CO2




When the CO2 control is in the MUST situation then the tank can be filled based on average temperature. 



The tank is filled via the schedule below.



Example of a graph where you can see the emptying and filling of the tank.







    • Related Articles

    • EN - How the tank control works for stock

           Question How the tank control works for stock?  Answer  The most important settings of the tank control for stock When it gets colder outside, you can build up a stock in the tank
    • EN - How an aspirator box works

           Question There is an aspiratox box installed. How does the aspirator box work?  Answer  The greenhouse temperature can be measured by an aspirator box. Inside the aspirator box there is a PT500 sensor. This sensor is made of Platinum (PT) and ...
    • NL - Waar monteer je de sensoren in een warmte opslag tank

         Vraag Waar monteer je de sensoren in een warmte opslag tank?  Antwoord  Gegevens van de tank: - 12 meter hoog - inhoud van 4.800 m3 - diameter is 22,6 m - 13 sensoren Standaard, als wij het adviseren, nemen we 10% van de totale hoogte van de tank ...
    • EN - How the heating pre-control works?

      Question The heating control is adapted to the outside measurements. How this pre-control works? Answer Every greenhouse departments can have one or more heating circuits to avoid that the greenhouse temperature becomes too low. The pipe temperature ...
    • EN - How the boiler control works?

           Question How the boiler control works?  Answer  The boiler control is a very energy friendly control. The boiler only produce heat when it is needed in the greenhouse. The boiler produces hot water. What the temperature of this water should be, ...